① Measurement of resin usage
The usage amount was imprinted on the surface of the mold.
You can use water to measure if some molds do not have usage marks.
② Resin mixing A: B=1:1 by volume
Mix the resin until it is transparent.
③ Pouring into the mold
Pour a layer of resin into the mold and tilt the mold to make the resin evenly covered.
Remove the bubbles at the bottom and edges, and blow away the bubbles on the surface with a heat gun.
Let resin flow down the wooden stick into the mold, and shake the mold to eliminate bubbles.
④ Curing time
Wait 12-24 hours for curing.
⑤ Demold
Spray alcohol or soapy water to help demold easier.

https://letsresin.com/pages/silicone-molds