https://letsresin.com/products/resin-bubble-remover

Q: Why do a few bubbles remain on the surface after degassing?
A: This can occur if the resin is not thoroughly mixed. To address this, spray a small amount of alcohol on the surface or use a heat gun to sweep them away.

Q: Why are there more bubbles in the resin after the machine starts working?
A: As the vacuum increases, previously invisible microscopic bubbles within the resin expand due to the pressure difference, making them appear more numerous visually. As the machine continues to operate, these bubbles will expand to their maximum point and then burst, resulting in fewer bubbles and purer resin.

Q: Why is the de-bubbling effect better with plastic cups than with silicone cups?
A: The internal friction within silicone cups is significantly higher than in plastic cups, it takes longer to remove bubbles effectively.

Q: Why can't the vacuum chamber be opened after vacuuming?
A: Is it a forced power off? If so, please connect the power supply and let the machine exhaust.

Q: What is the capacity of the resin bubbles remover?
3pcs 8oz/240ml cups
1pcs 16oz/480ml cups
1pcs 32oz/960ml cups