The Electric Valve Controller (digital valve controller) is a compact, easy-to-use solution for oil and gas automation, including remote monitoring and control of your production.
- Easy to use
- Cost effective
- Low power draw
- Override feature

Use the EVC for:
- Back pressure on a separator
- Suction control on a compressor
- Pressure differential on a meter run
- Hi-low gap control on the inlet of a gas processing unit

---
0:00 Introduction
0:45 Electric Valve Controller
2:00 4 Advantages of this Valve
3:22 Applications
3:40 Conclusion & Other Video Recommendations

=============================
Check out the full blog post: https://bit.ly/3dKOYtc
SUBSCRIBE to the CHRONICLE: https://kimray.com/Subscribe
=============================

PODCAST (APPLE): https://apple.co/3c82VQd
PODCAST (SPOTIFY): https://spoti.fi/2ZMCm0j
 
FACEBOOK: https://www.facebook.com/KimrayInc
LINKEDIN: https://www.linkedin.com/company/kimray-inc/

PRODUCT & TECHNICAL SUPPORT: [email protected] or 405-525-4264

WORK @ KIMRAY: https://kimray.com/Careers

PRODUCTS IN THIS VIDEO:
The Transducer receives process pressure and gives a raw 4-20mA signal to the pilot.
The Electric Pilot takes that signal and converts it to a proportional 4-20mA signal and sends that to the I/P Positioner.
The I/P positioner receives this electric input signal as well as a supply gas input.
The supply gas input comes through the drip pot, which removes excess liquids, and the supply gas regulator, which keeps the pressure to a manageable level to allow an adequate feed with input to the I/P.
The I/P Positioner converts that electric input signal to a corresponding 6-30 PSI output signal and sends that level of supply gas to the High Pressure Control Valve.

---

Leave a comment below if you have any questions! Some question can be answered online, but for detailed technical support, email [email protected] and mention which video your referencing.