1. Accessing Line Command: Activate the Line command in AutoCAD.

2. Specifying Start Point: Begin by selecting the Line command, then click anywhere in the drawing area to set the start point of the line.

3. Entering Polar Coordinates: When prompted for the next point of the line, use @ with "less than" or "greater than" to specify the distance and angle relative to the previous point.

- For distance: Use @ followed by the distance value.

- For angle: Use "less than" for counterclockwise rotation or "greater than" for clockwise rotation, followed by the angle value relative to the positive X-axis.

4. Drawing Line: After specifying the polar coordinates, AutoCAD will draw the line from the start point based on the specified distance and angle.

5. Finishing Line: Once the line is drawn, press Enter or right-click to finish the command.

To summarize:
- Activate the Line command.
- Specify the start point of the line.
- Use @ with "less than" or "greater than" to enter polar coordinates relative to the previous point.
- AutoCAD will draw the line accordingly.
- Press Enter or right-click to finish drawing the line.
#tutorial #autocad #line #polarcoordinates #polar #coordinate

I hope this video so useful to you guys.
if you have any questions do not hesitate to tell me.
after that, if you interested, hit the SUBSCRIBE button.
https://www.youtube.com/channel/UCgBEDmrYSSnWbSi1-g4wrvQ?sub_confirmation=1