DIY Sony TV Repair How to Replace DLP Lamp and Bulb EASY Broken Sony Bulb Lamp Help No Picture
Click Here to BUY YOUR BULB: http://www.shopjimmy.com/dlplamps


*Sales info is subject to exclusions and change. Important product and sales notes are updated via the YouTube Annotations feature. Please make sure that you have Annotations turned on / enabled to see all product updates during the video!

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The bulb and lamp shown in this video are replacements for the following LCD Projection TV models:

• SONY KDF-55WF655
• SONY KDF-55XS955
• SONY KDF-60WE655
• SONY KDF-60WF655
• SONY KDF-60XS955
• SONY KDF-E55A20
• SONY KDF-E60A20

bulb replacement for sony x l dash two zero zero lamp brought to you by shopjimmy.com
visit www.shopjimmy.com to search the hundreds of thousands of tv parts in our inventory
to properly replace the bulb inside of your d l p lamp you'll need the following materials
a pair of latex gloves your shopjimmy.com replacement bulb a pair of needle nose pliers a cup to hold your lamp's screws clips and other small items both a flathead and phillips screwdriver and a piece of tape or sticker to use as a marker so let's get to it shall we
release the lamp plug from the housing by removing the two screws that surround the plug
remove all other housing screws with a screwdriver for this lamp there is only one housing screw located at the top of the housing pull the two pieces of housing apart guiding the lamp plug and wires with the bulb release the bulb from the housing by removing the screws and metal bulb clips make sure to note the locations of clips orientation of the bulb within the housing and orientation of the wires before removing the wire harness from the bulb mark one wire with a piece of tape or sticker and make a note so that you don't forget if you've marked the rear or side terminal connection of the wire harness release the rear bulb terminal by removing the nut and washer with a needle nose pliers release the side bulb terminal by removing the screw with a phillips screwdriver prior to installing your new bulb check both bulbs and verify that they are equal place the new bulb into the front housing piece referring to your notes to ensure the correct orientation reinstall the bulb clips and screws referring to your notes to verify that you are placing the clips in the correct locations reinstall the wire harness refer back to your notes to confirm that you have matched the terminal connections correctly and to make sure that you have the wires pointing in the correct direction reconnect the two halves of the housing make sure that all screw holes are in line and that all plastic clips are connected prior to reinserting any screws
reinsert all housing screws slide the plug back into place and hold it in place with the corresponding screws well look at that you did it your lamp is now ready to be reinstalled into your tv thank you for watching one of our many tutorials here at shopjimmy.com if you need any further assistance please don't hesitate to call our award winning customer service team at the number on your screen to help with your inquiry please write down the shop jimmy item number also provided on your screen

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.