Sony XL-5200 Projector Bad Bulb, NO Light No Picture TV Repair Common DLP Lamp Help
Click Here to BUY YOUR TV LAMP: http://www.shopjimmy.com/catalogsearch/result/?q=XL-5200

This video is designed to be a guide for testing and troubleshooting your TV repair. Please note that other complications may exist that aren't addressed in this guide. While we always strive to provide accurate and detailed information, we can't guarantee that it will fix your TV's issues.

*Sales info is subject to exclusions and change. Important product and sales notes are updated via the YouTube Annotations feature. Please make sure that you have Annotations turned on / enabled to see all product updates during the video!

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The bulb and lamp shown in this video are replacements for the following LCD Projection TV models:

• SONY KDS-50A2000
• SONY KDS-50A2020
• SONY KDS-50A3000
• SONY KDS-50AL120
• SONY KDS-55A2000
• SONY KDS-55A2020
• SONY KDS-55A3000
• SONY KDS-60A2000
• SONY KDS-60A2020
• SONY KDS-60A3000
• SONY KDS-Z60XBR5
• SONY KDS-Z70XBR5


Bulb replacement for sony x l dash five two zero zero lamp brought to you by shopjimmy.com visit www.shopjimmy.com to search the hundreds of thousands of TV parts in our inventory. To properly replace the bulb inside your D L P lamp you will need the following materials a pair of latex gloves your shop jimmy replacement bulb a pair of needle nose pliers a cup to
hold your lamps screws clips and other small items both a flat head and phillips screw driver and a piece of tape or sticker to use as a marker so lets get to it shall we. Release the lamp plug from the housing by removing the two screws that surround the plug. Remove all other housing screws with a screwdriver. For this lamp there is only one housing screw located at the top of the housing Pull the two pieces of housing apart guiding the lamp plug and wires with the bulb. Release the bulb from the housing by removing the screws and metal bulb clips make sure to note the location of clips orientation of the bulb within the housing and orientation of the wires. Before removing the wire harness from the bulb mark one wire with a piece of tape or sticker and make a note so that you don't forget if you have marked the rear or side terminal connection of the wire harness. Release the rear bulb terminal by removing the nut and washer with a needle nose pliers. Release the side bulb terminal by removing the screw with a phillips screw driver. Prior to installing your new bulb check both bulbs and verify that they are equal. Reinstall the wire harness refer back to your notes to confirm that you have matched the terminal connections correctly and to make sure that you have the wires pointing in the correct direction. Place the new bulb into the front housing piece referring to your notes to insure the correct orientation. Reinstall the bulb clips and screws referring to your notes to verify that you are putting the clips in the correct locations. Reconnect the two halves of the housing make sure that all the screw holes are in line and that all plastic clips are connected prior to re-inserting any screws. Reinsert all housing screws. Slide the plug back into place and hold it in place with the corresponding screws. Well look at that
you did it your lamp is now ready to be reinstalled into your TV Thank you for watching one of our many tutorials here at shopjimmy.com

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.