DIY Mitsubishi 915P020010 Bulb Replacement Tutorial Help & How to replace Mitsubishi Bulb and Lamp Help Save Money
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com/catalogsearch/result/?q=915P020010

*Sales info is subject to exclusions and change. Important product and sales notes are updated via the YouTube Annotations feature. Please make sure that you have Annotations turned on / enabled to see all product updates during the video!

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The bulb and lamp shown in this video are replacements for the following DLP Rear Projection TV models:

• MITSUBISHI 62DL5
• MITSUBISHI WD-52327
• MITSUBISHI WD-52525
• MITSUBISHI WD-52725
• MITSUBISHI WD-52825
• MITSUBISHI WD-52825G
• MITSUBISHI WD-62327
• MITSUBISHI WD-62525
• MITSUBISHI WD-62725
• MITSUBISHI WD-62825
• MITSUBISHI WD-62825G
• MITSUBISHI WE-52825

Bulb replacement for Mitsubishi nine one five p zero two zero zero one zero Lamp
brought to you by shopjimmy.com
Visit www.shopjimmy.com to search the hundreds of thousands of TV parts in our inventory
To properly replace the bulb inside your projection TV lamp
You will need the following materials
Latex Gloves
shopjimmy.com replacement bulb
A pair of Needle Nose Pliers
A cup to hold your lamps screws clips and other items
Both a flat head and phillips screwdriver
and a piece of tape to use as a marker or guide
So lets get to it shall we?
Release the lamp plug from the housing by removing the screw that surrounds the plug
Remove all other housing screws with a screwdriver
For this lamp there are only two screws located on two sides of the housing
Pull the two pieces of housing apart
Release the bulb from the housing by removing the screws and metal bulb clips
make sure to note the location of clips orientation of the bulb within the housing and orientation of the wires
remove the bulb from the housing
Before removing the wire harness from the bulb
mark one wire with a piece of tape or sticker
and make a note so that you don't forget if you have marked the rear or side terminal connection of the wire harness
Release the rear bulb terminal by removing the nut and washer with a needle nose pliers
Release the side bulb terminal by removing the screw with a phillips screw driver
Prior to installing your new bulb
check both bulbs and verify that they are equal
Reinstall the wire harness
refer back to your notes to confirm that you have matched the terminal connections correctly
and to make sure that you have the wires pointing in the correct direction
Place the new bulb into the front housing piece referring to your notes to insure the correct orientation
Reinstall the bulb clips and screws referring to your notes to verify that you are putting the clips in the correct locations
reattach the housing
Reconnect the two halves of the housing
Reinsert all housing screws
Slide the plug back into place and hold it in place with the screw
Well look at that you did it your lamp is now ready to be reinstalled into your TV
Thank you for watching one of our many tutorials here at shopjimmy.com
if you need any further assistance please don't hesitate to call our award winning customer service team at the number on your screen
to help with the inquiry please write down the shop jimmy item number also provided on your screen.

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.