DLP Chip Replacement Help - How to replace the DLP Chip in your TV
Click Here for Your Replacement DLP Chip: http://www.shopjimmy.com/dlp-chips/?utm_source=youtube&utm_medium=dlpchipvideo&utm_campaign=dlpchipvideo

The Kit includes:
- 1 thermal pad
- 1 poly glove
- 1 lint-free microfiber cloth

This video is designed to be a guide for testing and troubleshooting your TV repair. Please note that other complications may exist that aren't addressed in this guide. While we always strive to provide accurate and detailed information, we can't guarantee that it will fix your TV's issues.

*Warranty and shipping prices may vary. Please see product page on our website for more information!*

.....................................................................................

Follow us:
Facebook -- http://www.facebook.com/ShopJimmy
Twitter -- http://twitter.com/shopjimmy

.....................................................................................

The DLP Chip shown in this video is a compatible replacement for the following DLP Rear Projection TV parts and models:

Part Numbers:

- 4719-001997
- 4719-001985
- 4719-001999

TV Models:

- MITSUBISHI WD-57733
- MITSUBISHI WD-57734
- MITSUBISHI WD-57833
- MITSUBISHI WD-60638
- MITSUBISHI WD-60733
- MITSUBISHI WD-60735
- MITSUBISHI WD-60737
- MITSUBISHI WD-60738
- MITSUBISHI WD-60833
- MITSUBISHI WD-60837
- MITSUBISHI WD-60C8
- MITSUBISHI WD-60C9
- MITSUBISHI WD-65638
- MITSUBISHI WD-65731
- MITSUBISHI WD-65733
- MITSUBISHI WD-65734
- MITSUBISHI WD-65735
- MITSUBISHI WD-65737
- MITSUBISHI WD-65738
- MITSUBISHI WD-65833
- MITSUBISHI WD-65837
- MITSUBISHI WD-65838
- MITSUBISHI WD-65C8
- MITSUBISHI WD-65C9
- MITSUBISHI WD-73638
- MITSUBISHI WD-73640
- MITSUBISHI WD-73733
- MITSUBISHI WD-73734
- MITSUBISHI WD-73735
- MITSUBISHI WD-73736
- MITSUBISHI WD-73737
- MITSUBISHI WD-73738
- MITSUBISHI WD-73833
- MITSUBISHI WD-73835
- MITSUBISHI WD-73837
- MITSUBISHI WD-73838
- MITSUBISHI WD-73840
- MITSUBISHI WD-73C11
- MITSUBISHI WD-73C8
- MITSUBISHI WD-73C9
- MITSUBISHI WD-75837
- MITSUBISHI WD-82737
- MITSUBISHI WD-82738
- MITSUBISHI WD-82838
- MITSUBISHI WD-C657
- MITSUBISHI WD-Y577
- MITSUBISHI WD-Y657
- SAMSUNG HL50A650C1FXZA
- SAMSUNG HL56A650C1FXZA
- SAMSUNG HL61A650C1FXZA
- SAMSUNG HL61A750A1FXZA
- SAMSUNG HL67A750A1FXZA
- SAMSUNG HLT5055WX/XAA
- SAMSUNG HLT5076SX/XAA
- SAMSUNG HLT5087SX/XAA
- SAMSUNG HLT5676SX/XAA
- SAMSUNG HLT5687SAX/XAA
- SAMSUNG HLT5687SX/XAA
- SAMSUNG HLT5689SX/XAA
- SAMSUNG HLT6156WX/XAA
- SAMSUNG HLT6176SX/XAA
- SAMSUNG HLT6187SAX/XAA
- SAMSUNG HLT6187SX/XAA
- SAMSUNG HLT6189SX/XAA
- SAMSUNG HLT6756W
- SAMSUNG HLT6756WX/XAA
- SAMSUNG HLT7288WX/XAA
- TOSHIBA 57HM167
- TOSHIBA 65HM167

Be sure to unplug your TV before starting any repairs.
Unscrew and remove the bottom panel from the back of your TV.
Remove all cables from the light engine.
Take care not to use excessive force when removing cables.
Exact locations of cables will vary depending on TV.
Remove the screws holding the light engine in place.
Carefully remove the light engine from the TV.
Remove the lens shroud by removing the corresponding screws.
Take care not to touch the lens.
Remove all cables from the DMD board.
Remove the DMD board housing screws.
Remove the back half of DMD board housing from the bottom.
Remove the DMD board screws.
Make sure to support the board as you remove the final screws.
Remove the DMD board from the light engine.
Release the DLP chip heatsink by removing the corresponding screws.
Remove the heatsink.
Remove any remaining DMD board screws.
Remove the DMD board from the front housing.
Unlock and remove the DLP chip from the DMD board.
Before installing the new DLP chip, please verify that it is equivalent in appearance to the original DLP chip,
and that all part numbers are compatible.
Compatible part numbers are listed on all relative ShopJimmy product pages.
Remove all fingerprints and dust from the glass surface with a clean microfiber cloth.
Install and lock your new DLP chip.
Reinstall the DMD board into the front half of the housing.
Reinstall the DLP chip heatsink.
Reinstall DMD board onto the light engine.
Reinstall the back half of the DMD board housing.
Reinstall all DMD board cables on the lens side.
Take care not to damage any cables when reinstalling.
Reinstall the lens shroud.
Before reinstalling the light engine into your tv,
please take a moment to verify all surfaces especially near the lens are clean and free of dust.

.....................................................................................

TV Repair Made Easy™
© 2014 ShopJimmy.com, LLC.