TV Stuck in Standby mode and will not turn on & No power for TV How to replace the Power supply tutorial
Click Here to BUY TV PARTS: http://bit.ly/ShopJimmy

Find Vizio 0940-0000-2270 Replacement Power Supply Boards at ShopJimmy.com:
http://www.shopjimmy.com/vizio-0940-0000-2270-power-supply.htm


FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The Power Supply shown in this video is a replacement for the following Plasma TV models:

Plasma TV Model Numbers:
• DYNEX DX-PDP42-09
• VIZIO VP422HDTV10A
• VIZIO VP423HDTV10A

Top Common Plasma TV problems for bad Power Supply Unit (PSU) Boards:
•  No Power (Dead TV), Red or No Standby Lights
•  Bad Capacitors, Blown Caps
•  Power Surges
•  Low Voltage Readings

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the Power Supply Unit (PSU) Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Power Supply Unit (PSU) Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
And a cup to hold all screws, clips, and any other small items. So let's get to it, shall we?

Instructions:
• Locate your TVs identification sticker and take note of the brand name, model number, serial number, and model code if present.
• Unscrew and remove the back cover.
• The Power Supply Unit (PSU) Board takes in and distributes power throughout the TV.
• This Power Supply Unit (PSU) Board is located at the center of the chassis.
• This power supply is connected to the power cord or the ac adapter.
• Carefully unplug all wires by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Please note that the LVDS cable is quite fragile. Two hands may be required to release and remove the connector.
• Unscrew and gently remove the bad Power Supply Unit (PSU) Board from the chassis.
• Search your TV model number on http://www.shopjimmy.com to find a compatible replacement.
• Filter your search results by the appropriate part type.
• Click on the search results to view important product specifications.
• Insert all screws to secure your ShopJimmy new power supply to the chassis.
• Reconnect all cables.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Power Supply Unit (PSU) Board does not require any manual configurations in order to function. Simply plug in and power on and your Plasma TV will function as if new!

Thank you for watching one of our many tutorials here at ShopJimmy.com! If you have any further questions regarding your repair, simply post a question in the comments section below or call our award-winning customer service team at the number on your screen. We strive to learn and share new TV repair tips every day. Subscribe to our youtube channel and grow with us. Share our videos with your friends and help us spread the savings. And don't forget to hit that like button!