Find Panasonic TNPA5072AE Replacement SS Boards at ShopJimmy.com:
http://www.shopjimmy.com/panasonic-tnpa5072ae-ss-board.htm

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The SS Board shown in this video is a compatible substitute for the following Part Number, and is a replacement for the following Plasma HDTV models:

Part Number:
• TNPA5072AG

Plasma TV Model Numbers:
• SANYO DP50710 P50710-00
• SANYO DP50710 P50710-01
• SANYO DP50740 P50740-00
• SANYO DP50741 P50741-01

Top Common Plasma TV problems for bad SS (XSUS) Boards:
• Lines on TV Screen
• TV Stuck in Test Pattern Mode
• Partial Picture on PDP
• No Power, TV Cycles Off
• TV Powers On When SS Board Is Disconnected From Power Supply

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your PDP TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the SS Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement SS Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name, model number, serial number, and model code if present.
• Unscrew and remove the back cover.
• The Z-Sustain, or ZSUS board if typically found on the right side of chassis. Some manufacturers use the names X-Sustain, Xsus, X-Main, or SS Board for this part.
• Carefully unplug all wires and ribbon cables by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon. Please do not use a screw driver to open ribbon connectors as it can cause damage to the pins.
• Unscrew and remove your bad SS Board.
• A partial part number for this item can be found printed on the board.
• The suffix information can be found stamped on the board.
• Search your part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Insert all screws to secure your ShopJimmy New SS Board to the chassis.
• Reconnect all cable and ribbon connections.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector, and close the tab on top.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement SS Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.

Thank you for watching one of many tutorials here at ShopJimmy.com! If you have any further questions regarding your repair, simply post a question in the comments section below, or call our award-winning customer service team at the number on your screen! We strive to learn and share new TV Repair Tips everyday. Subscribe to our YouTube Channel and grow with us! Share our videos with your friends, and help us spread the savings! And don't forget to hit that Like button!