Backlight Inverter Replacement Guide
Click Here to BUY TV REPAIR PARTS: http://bit.ly/ShopJimmyTV
FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................
The Backlight Inverter Board shown in this video is a replacement for the following LCD TV models:
LCD TV Model Numbers:
• AKAI LCT2701AD
• AKAI LCT2701TD
• AKAI LCT2715
• AKAI LCT2785TA
• AOC N27XA22-2
• ASTAR LTV-2701
• ASTAR LTV-27HBG
• AUDIOVOX FPE2706
• AUDIOVOX FPE2706DV
• BUSH IDLCD27TV006
• BUSH LCD27TV005HD
• BUSH LCD27TV006HD
• BUSH LCD27TV022X
• DIGIMATE DGL2700
• ENVISION LT27W461
• FUNAI LCD-B2706
• GOODMANS GTV27W3LCD
• ILO LCT27HA36
• INSIGNIA NS-27LCD
• LEXSOR 27LCDTV
• LEXTRON LXT26T6S
• LG RZ-27LZ55
• NORCENT LT-2723
• NORCENT LT2722
• OLEVIA 227-S11
• OLEVIA 527-S11
• OLEVIA LT27HVX
• PROTRON PLTV-27CM
• PROTRON PLTV-27NW30
• PROVIEW RX-276
• SAMSUNG LE27S73BDX/XEU
• SANYO CE27LD4-B
• SCEPTRE X27SV-NAGA
• SHARP LC-C5262U
• SYLVANIA 6626LG
• SYMPHONIC WF32L6
• TOSHIBA 27HL95
• TOSHIBA 27HLV95
• VIEWSONIC N2750W
• VIEWSONIC VS10576-1M
• VIORE LCD26V37HAU
• WESTINGHOUSE LCM-27W4
• WESTINGHOUSE LTV-27W2
• WESTINGHOUSE LTV-27W6HD
• WESTINGHOUSE LTV-27W7HD
• XENIUS 27LCDTV
.....................................................................................................
TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.
.....................................................................................................
Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.
Materials Needed:
To be best prepared to replace the Backlight Inverter Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Backlight Inverter Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?
Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Backlight Inverter is a part of your TV's LCD Panel Assembly. The Backlight Inverter is mounted to the back of the Panel close to the right edge, and can be hidden under a metal or plastic cover.
• Backlight Inverters are connected to the panel via small wires or lock into a series of small slot connections built into the panel.
• This board is mounted to the back of the display panel, and requires removing a top layer of the chassis.
• Unscrew and remove the top layer of the chassis.
• Carefully unplug all wires by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Carefully remove the top layer of the chassis.
• Carefully unplug all wires by hand.
• Unscrew and remove your bad Backlight Inverter Board.
• The part number for this item can be found printed on a barcode label.
• Search your part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Insert all screws to secure your ShopJimmy New Backlight Inverter Board to the chassis.
• Reconnect all cables.
• Reinstall the top layer of the chassis.
• Reconnect all cables.
• Reinstall the top layer of the chassis.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Backlight Inverter Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.