Find Philips 996510006929 Replacement Backlight Inverter Master Boards at ShopJimmy.com:
http://www.shopjimmy.com/philips-996510006929-backlight-inverter-master.htm

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The Backlight Inverter Board shown in this video is a compatible substitute for the following Part Numbers, and is a replacement for the following LCD TV models:

Part Numbers:
• 19.42T01.018/19.42T01.019
• 996510006929/996510006932
• 19.42T04.001/19.42T04.002

LCD TV Model Numbers:
• LG 42LG3000-ZA
• LG 42LG50-UA
• PHILIPS 42PFL7422D/37
• PHILIPS 42PFL7432D/37
• POLAROID FLM-4243B
• POLAROID TLX-04244B
• SANYO DP42848
• SANYO DP42849
• SCEPTRE X42BV-FULLHD
• TECHWOOD 42832 HD DIGITAL
• XENIUS LCDX42WHD88

Top Common LCD TV Problems for bad Backlight Inverter Boards:
• No Backlight
• Has Audio But No Video
• Dim Video (Back Light)
• TV Turns On, Backlight Inverter Immediately Turns Off
• Buzzing Sound From Backlight Inverter Transformers
• Smoke / Burnt Components On Backlight Inverter

.....................................................................................................

TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the Backlight Inverter Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Backlight Inverter Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Backlight Inverter is a part of your TV's LCD Panel Assembly. The Backlight Inverter is mounted to the back of the Panel close to the left edge, and can be hidden under a metal or plastic cover.
• These inverters are given different numbers or are named master and slave depending on their location and function.
• Backlight Inverters are connected to the panel via small wires or lock into a series of small slot connections built into the panel.
• Carefully unplug all wires and ribbon cables by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon. Please do not use a screw driver to open ribbon connectors as it can cause damage to the pins.
• Unscrew and remove your bad Backlight Inverter Board.
• A partial part number for this item can be found printed on the barcode label.
• Search your partial part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Insert all screws to secure your ShopJimmy New Backlight Inverter Board to the chassis.
• Reconnect all cable and ribbon connections.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector, and close the tab on the top.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Backlight Inverter Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.