RCA TV Repair Westinghouse TV Repair T Con Board Tutorial & No Picture Vertical Lines on TV
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com

Find RCA/Westinghouse HV320WXC1007061 Replacement T-Con Boards at ShopJimmy.com:
http://www.shopjimmy.com/catalogsearch/result/?q=HV320WXC1007061

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The T-Con Board shown in this video is a replacement for the following LCD TV models:

LCD TV Model Numbers:
• ELEMENT ELEFW325
• RCA 32LA30RQD
• SEIKI SE321FB
• VIORE LC32VH62
• VIORE LC32VH70
• WESTINGHOUSE VR-3215
• WESTINGHOUSE VR-3235

Top Common LCD TV problems for bad Timing Control T-Con Boards:
• Lines on TV Screen
• Solarization, Inverted LCD Display, Negative Picture
• High Contrast Colors
• Coloured Dots
• Bad LVDS Cable

.....................................................................................................

TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the T-Con Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement T-Con Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Timing Control, or T-Con Board is a part of your TV's LCD Panel Assembly. It is connected to the Main Board via the LVDS Cable, and to the LCD Panel via flat ribbon cables. The T-Con Board is centered on the top edge of the back of the Panel and can be hidden under a metal or plastic cover.
• This board is mounted to the back of the display panel, and requires removing a top layer of the chassis.
• Carefully unplug all wires by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Unscrew and remove the cover for your part.
• Loosen main board from chassis.
• Loosen and slide the metal plate down on the chassis.
• Disconnect the LVDS cable from the T-Con Board.
• Please note that the LVDS cable is quite fragile. Two hands may be required to release and remove the connector.
• Unscrew and remove the cover for your part.
• Carefully unplug the ribbon cable by hand.
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon. Please do not use a screw driver to open ribbon connectors as it can cause damage to the pins.
• Remove your bad T-Con Board.
• The part number for this item can be found printed on a barcode label.
• Search your part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Place your ShopJimmy New T-Con Board onto the chassis.
• Reconnect the ribbon cable.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector, and close the tab on the top.
• Insert all screws to secure the cover for your part.
• Connect the LVDS cable to the T-Con Board.
• Reinstall the metal plate.
• Reinstall the main board.
• Insert all screws to secure the cover for your part.
• Reconnect all cables.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement T-Con Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.