TV Repair No Picture On Chi Mei Power Supply Backlight Help How to Replace CMO T-Con Board Vertical Lines Fix
Click Here to BUY TV Repair Parts: http://www.shopjimmy.com

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
.....................................................................................................

The T-Con shown in this video is a replacement for the following LCD TV models:

LCD TV Model Numbers:
• ACOUSTIC SOLUTIONS LCD32NK750HD
• DUAL DLCD3221
• ELEMENT FLX-3202
• HITACHI 32LD6600B
• INSIGNIA IS-LCDTV32
• INSIGNIA NS-32LCD
• LUXOR 3211
• MATSUI LN32HD1
• MEDION MD20099-S
• OLEVIA 532-B12
• PENTUS 32LCDTV
• POLAROID FLM-3232
• POLAROID FLM-323B 3200
• POLAROID FXM-3211C
• POLAROID TDX-03211C
• PROVIEW 3200
• RCA L32WD12
• SANYO CE32LC6-B
• SOYO DYLT032B
• SOYO DYLT032D
• SWISSTEC J32/2CG
• VISCO VSC-32V1
• VISCO VSC-37V1
• WESTINGHOUSE LTV-32W3HD
• WESTINGHOUSE LTV-32W6HD
• XENIUS 32LCDTV

Top Common LCD TV problems for bad Timing Control T-Con Boards:
• Lines on TV Screen
• Solarization, Inverted LCD Display, Negative Picture
• High Contrast Colors
• Coloured Dots
• Bad LVDS Cable

.....................................................................................................

TV Repair Made Easy™
© 2012 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the T-Con inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement T-Con.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it, shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name, model number, serial number, and model code if present.
• Unscrew and remove the back cover.
• Unscrew and remove the top layer of the chassis.
• Lift the top layer slowly and disconnect all cables from the backlight inverter as well as the LVDS cable from the T-Con board.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires, be sure to keep a firm grip with both hands.
• Please note that the LVDS cable is quite fragile. Two hands may be required to release and remove the connector.
• The timing control board, or T-Con board is a part of your TV's LCD Panel Assembly. It is connected to the main board via the LVDS cable and to the LCD panel via flat ribbon cables.
• The T-Con board is centered at the top edge of the back of the panel and can be hidden under a metal or plastic cover.
• Carefully unplug all wires and ribbon cables by hand.
• Using your finger, flip up the tab on the ribbon connector and gently remove the ribbon.
• Please do not use a screwdriver to open ribbon connectors as it can cause damage to the pins.
• Unscrew and remove your original T-Con board from the chassis.
• The part number for this item can be found printed on a barcode label.
• Search your partial part number on http://www.shopjimmy.com/ to find a compatible replacement.
• Click on the search results to view important product specifications.
• Insert all screws to secure your ShopJimmy new T-Con board to the chassis.
• Reconnect all cable and ribbon connections.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector and close the tab on the top.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement T-Con board does not require any manual configurations in order to function. Simply plug in and power on and your LCD TV will function as if new!