How to replace the y sustain board for a plasma TV without image & Plasma TV Repair
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com/catalogsearch/result/?q=6871QYH029A

Find LG 6871QYH029A Replacement YSUS Boards at ShopJimmy.com:
http://www.shopjimmy.com/lg-6871qyh029a-ysus.htm
• 180-Day Warranty on all Replacement TV Parts!*
• FREE Technical Support Tips! Call (877) 881-6492

*Some exclusions may apply

FOLLOW US:
Twitter - @ShopJimmy - http://twitter.com/shopjimmy
Facebook - ShopJimmy.com - http://www.facebook.com/ShopJimmy
........................................­.......................................................

The YSUS Board shown in this video is a compatible substitute for the following Part Number, and is a replacement for the following Plasma TV models:

Part Number:
• 6871QYH029R

Plasma TV Model Numbers:
• Akai PDP4206EM
• ESA PDP4294LV1
• Funai F42PDME
• Hitachi 42EDT41A
• Hitachi 42EDT41
• Hyundai HPTN-4200S
• LG MU-42PM11
• LG RU-42PZ71
• LG RU-42PX11
• LG RU-42W46X
• LG RZ-42PX11
• Matsui 42P100
• Relisys RP4207S-RU
• Relisys RP42AB20(S)-RU
• Superscan SSH2442
• Sylvania 6842PE
• Techwood TWP4210
• Tosumi NR TOK42PDP
• Viore PDP4210EA
• Zenith P42W46X

Top Common LG Plasma TV problems for bad YSUS Boards:
• Lines on TV Screen,
• TV Stuck in Test Pattern Mode,
• Partial Picture on PDP,
• No Power, TV Cycles Off,
• TV Powers On When SN Board Is Disconnected From Power Supply
• TV Blink Code, Power Light Flashing

........................................­.......................................................

TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.

........................................­.......................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the YSUS Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement YSUS Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Y-Sustain or YSUS board is located on the left side of the chassis. The YSUS Board connects to the PDP assembly through a buffer system most commonly called a Y-Buffer or a Scan Drive. This buffer system can be comprised of one or two boards or can be built directly into the Y-Sustain. Some manufacturers suggest replacing the Y-Sustain board and all Y-Buffers, as it can be difficult to pinpoint faulty boards.
• Carefully unplug all wires and ribbon cables by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon. Please do not use a screw driver to open ribbon connectors as it can cause damage to the pins.
• Unscrew and remove your bad YSUS Board from the chassis.
• The part number for this item can be found printed on a barcode label.
• Search your part number on http://www.shopjimmy.com to find a compatible replacement.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Insert all screws to secure your ShopJimmy New YSUS Board to the chassis.
• Reconnect all cable and ribbon connections.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector, and close the tab on top.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement YSUS Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.