How to Easily Remove LED Strips
CLICK HERE for LED STRIPS: https://www.shopjimmy.com/tvs/tv-led-light-strip/

In this video we will show a repair tip that can be used when replacing TCL LED Strips. While replacing LED strips in most TVs, you will need to remove the reflector sheet to access the LED Strips. Some TCL models and other brands as well the reflector sheet may be very difficult to remove and might actually be damaged if removed, because of the adhesive that holds it to the TV chassis.

We have found we can take a razor blade and run it along the LED strip to cut out the reflector sheet where the LED strip is.
The first step is to be sure your TV is turned off. Then you will need to access the LED strips, in order to replace them, by removing all the necessary pieces on your TV, the bezel, the panel, the filter frame, and the filters.
Once you get to the reflector sheet and LED Strips, if the reflector sheet is tough to remove, we recommend cutting out the sheet over the LED strips.
While cutting this out, you will want to be very careful to not cut any wires or cables that might be connecting the strips to each to provide power for them.
After you have done all of your cutting, remove the strips and then install the replacements. If you notice that the reflector sheet is loose at all next to the strips, it may cause an image problem with your TV after you put everything together. We recommend putting down double sided tape to hold the strips tight to the reflector sheet and chassis.
After this is completed, continue the steps for replacing your LED Strips.

TV Repair Made Easy™
© 2019 ShopJimmy.com, LLC.