Examples of Two Port Network in Network Theory explained with following Timestamps:
0:00 - Examples of Two Port Network - Network Theory
0:38 - 1 Example of Two Port Network (Z parameters Example)
4:47 - 2 Example of Two Port Network (Y parameters Example)
9:09 - Summery

Examples of Two Port Network in Network Theory explained with following outlines:
0. Network Theory
1. Examples of Two Port Network
2. Two Port Network
3. Examples on Z Parameters
4. Examples on Y Parameters
5. Z Parameters or Impedance Parameters
6. Y Parameters or Admittance Parameters

Engineering Funda channel is all about Engineering and Technology. Here this video is a part of Network Theory / Circuit and Network.

#TwoPortNetwork #NetworkTheory #CircuitAndNetwork #EngineeringFunda

Details of Two Port Network Parameters:
In electrical engineering, a two-port network is a circuit that has two pairs of terminals, one for input and one for output. Two-port networks are used to represent a wide range of electrical systems, including amplifiers, filters, and transmission lines.

There are several parameters used to describe the behavior of two-port networks, some of the most common are:

Impedance Parameters (Z-parameters): These are defined as the input and output voltage-current ratios when the network is terminated with a particular impedance. The four parameters are Z11, Z12, Z21, and Z22.

Admittance Parameters (Y-parameters): These are the input and output current-voltage ratios when the network is terminated with a particular admittance. The four parameters are Y11, Y12, Y21, and Y22.

Hybrid Parameters (h-parameters): These are the input voltage-current and output current-voltage ratios when the other port is short-circuited. The four parameters are h11, h12, h21, and h22.

Scattering Parameters (S-parameters): These describe the relationship between the incident and reflected waves in the network. The four parameters are S11, S12, S21, and S22.

Transmission Parameters (ABCD-parameters): These describe the relationship between the input and output voltages and currents of the network. The four parameters are A, B, C, and D.

Each set of parameters has its own strengths and weaknesses in terms of ease of use and suitability for different types of analysis. The choice of parameter set depends on the specific application and the goals of the analysis.