Examples of AC Analysis in RLC Circuit in Network Theory explained with following Timestamps:
0:00 - Examples of AC Analysis in RLC Circuit - Network Theory
0:16 - 1 Example
7:56 - 2 Example
11:18 - Summery

Examples of AC Analysis in RLC Circuit in Network Theory explained with following outlines:
0. Network Theory
1. Examples of AC Analysis in RLC Circuit
2. AC Analysis
3. RLC Circuit
4. Series RLC Circuit
5. Parallel RLC Circuit
6. Resonance Frequency
7. Bandwidth
8. Quality Factor
9. Damping Factor
10. Resonance Frequency

Engineering Funda channel is all about Engineering and Technology. Here this video is a part of Network Theory / Circuit and Network.

#ACAnalysis #RLCCricuit #NetworkTheory #CircuitAndNetwork #EngineeringFunda

Details of AC Analysis in RLC Circuit in Network Theory:

In network theory, AC analysis refers to the study of the behavior of a circuit that contains both resistive, inductive, and capacitive elements when an alternating voltage or current is applied. In particular, AC analysis of an RLC circuit is used to analyze circuits that contain a combination of resistors, inductors, and capacitors.

An RLC circuit consists of a resistor (R), an inductor (L), and a capacitor (C) connected in series or in parallel. When an alternating current is applied to the circuit, the capacitor and inductor will store and release energy in a cyclical manner, leading to complex variations in voltage and current throughout the circuit.

To perform AC analysis on an RLC circuit, the circuit must first be converted into an equivalent circuit that is purely resistive, or purely capacitive, or purely inductive. This can be achieved by using techniques such as impedance matching or phasor analysis.

In impedance matching, the impedance of the RLC circuit is transformed to match that of a purely resistive circuit. This is done by adding or removing components in the circuit, such as capacitors or inductors, until the impedance of the circuit is purely resistive.

In phasor analysis, the voltage and current signals in the circuit are represented as phasors, which are complex numbers that have a magnitude and phase angle. By using phasors, the sinusoidal AC signals in the circuit can be transformed into algebraic equations, making it easier to analyze the circuit.

Once the circuit is in an equivalent form, it can be analyzed using techniques such as Kirchhoff's laws, Ohm's law, and the voltage divider rule. The analysis can then be used to calculate the voltage and current at different points in the circuit, the power dissipated by the circuit, and the resonant frequency of the circuit.

Overall, AC analysis of an RLC circuit is a powerful tool for understanding the behavior of circuits that contain resistive, inductive, and capacitive elements when an alternating voltage or current is applied.